Yamaha RX-A2010 User Manual

En

Perform the following steps (a and b) within 
10 seconds.

a On this unit, press one of the following keys to which you want to 

assign a function.

For playback device: SOURCE 

, menu operations keys, 

DISPLAY, MODE, external device operation keys, numeric keys

For TV: TV operation keys

b On the external device, press the key from which the operation 

is learned until “OK” appears in the display window.

If “NG” appears, learning failed. Repeat from step 4.

• This remote control can learn approximately 200 functions (may be 

decreased depending on the signals). If “FULL” appears in the display 
window, clear unnecessary assignments to free some memory space for the 
new functions.

You can edit the device names or scene names displayed on the 
remote control’s display window.

Perform each of the following steps within 30 seconds.

Otherwise, the setting will be canceled. In this case, repeat 
from step 1.

For playback device: press the input selection key 
(corresponding to the input jacks where the device is 
connected).

For TV: press TV 

.

For AV receiver (this unit): press RECEIVER 

.

For scene: press one of the SCENE keys.

• To edit scene names of each zone, press one of the SCENE keys and press 

ZONE to select a zone.

Remote control of external device

5 to 10 cm apart

• If you press RECEIVER 

 in step 3, you can assign functions of an external 

receiver to the menu operation keys, external device operation keys or 
numeric keys. However, it makes these keys to control this unit impossible. If 
you need to restore the remote control code for this unit, perform the following 
steps.

a Press SETUP.
b Use the cursor keys ( / ) to select “CLEAR” and press ENTER.
c Use the cursor keys ( / ) to select “LEARN” and press ENTER.
d Press RECEIVER  .
e Hold down ENTER until “OK” appears on the window display.
f To exit from the setup menu, press SETUP.

RENAME