Yamaha RX-A2010 User Manual

En

If you have changed speakers or speaker system, use “Auto Setup” to optimize the 
speaker settings again (p.44). If you want to adjust the speaker settings manually, use 
“Manual Setup” in the “Setup” menu (p.109).

If a small child, etc. accidentally operates the controls on the main unit or remote 
control, the volume may suddenly increase. And this may cause injury or damage this 
unit or speakers. We recommend using “Max Volume” in the “Setup” menu to set the 
maximum volume level for this unit in advance (p.113). You can also set the maximum 
volume for Zone2 or Zone3 (p.118).

By default, the volume level when this unit last entered standby mode is automatically 
applied. If you want to fix the volume, use “Initial Volume” to set the volume to be 
applied when this receiver is turned on (p.113). You can also set the initial volume for 
Zone2 or Zone3 (p.118).

To use HDMI Control, you need to perform the HDMI Control link setup (p.150). After 
connecting HDMI Control-compatible devices (TV, BD/DVD players, etc.) to this unit, 
enable HDMI Control on each device and perform the HDMI Control link setup. This 
setup is required every time when you add a new HDMI Control-compatible device to 
your system. For information on how HDMI Control works between your TV and 
playback devices, refer to the instruction manuals of each device.

By default, short messages are displayed on the TV screen when this unit is operated 
(input selection, volume adjustment, etc). In case that the short messages bother you 
when you are watching movies or sports, configure “Short Message” (p.121) in the 
“Setup” menu to turn off the short messages.

You can protect the settings configured on this unit (speaker settings, etc.) by utilizing 
“Memory Guard” in the “Setup” menu (p.122).

The web control screen (p.92) becomes inaccessible...

If you are using a DHCP server, the IP address of this unit may change each time this 
unit is turned on. Check the IP address of this unit in “Network” (p.124) in the 
“Information” menu. Also, if you have enabled “MAC Address Filter” (p.118), you need 
to specify the MAC address of your PC in “Address Setup” (p.118) to allow the PC to 
access this unit. For information on how to check the MAC address of your PC, refer to 
the instruction manuals of it.

When using multiple Yamaha products, the supplied remote control may work on 
another Yamaha product or another remote control may work on this unit. In this case, 
set each remote control with a unique remote control ID for its corresponding receiver 
(p.125).