Yamaha RX-A2010 User Manual

En

You can play back music files stored on your PC or DLNA-
compatible NAS on this unit.

• To use this function, this unit and your PC must be connected to the network 

properly (p.40). You can check whether the network parameters (IP address, etc.) 
are properly assigned to this unit in “Network” (p.124) in the “Information”.

• This unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC 

and FLAC files.

• This unit is compatible with sampling frequency of up to 96 kHz for WAV and 

FLAC files, and 48 kHz for other files.

• To play back FLAC files, you need to install server software that supports sharing 

of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.

This unit can play back music files stored on the following music 
servers.
- PC with Windows Media Player 11 or later installed
- PC with DLNA/UPnP certificate server software installed
- NAS with DLNA/UPnP certification

To play back music files stored on your PC or DLNA-compatible 
NAS, first you need to configure the media sharing setting on each 
music server.

■ 

■ 

Refer to the instruction manual of the device or software and 
configure the media sharing setting.

Follow the procedure below to operate the PC music contents and 
start playback.

The browse screen is displayed on the TV.

• If playback of a music file selected from this unit is ongoing on your PC, the 

playback screen is displayed. This function works only when “DMC Control” 
(p.100) in the “Input” menu is set to “Disable”.

If a song is selected, playback starts and the playback 
screen is displayed.