Yamaha RX-A2010 User Manual

En

You can control this unit with the web control screen displayed in 
the web browser.

• To use this function, this unit and your PC must be connected to the network 

properly (p.40).

• Some security software installed on your PC may block the access of this 

unit to your PC. In such cases, configure the security software appropriately.

• We recommend using Internet Explorer 7.x or 8.x as a web browser.

• If you set “Network Standby” (p.93) to “On”, you can display the web control 

screen even when this unit is in standby mode.

• You can limit access to this unit from the network devices (PCs, etc.) with 

the MAC address filter (p.93).

(Example)

• You can check the IP address in “Network” (p.124) in the “Information” 

menu.

• By adding the IP address of this unit to the bookmark of the browser, you will 

be able to open it without entering the IP address from the next time. 
However, the IP address of this unit may change if you are using a DHCP 
server.

■ 

1

Moves to the control screen for the selected zone.

2

Turns on/off the power for each zone, or displays the input source and 
volume set for each zone.

3

Moves to the settings screen.

4

Turns on/off the party mode (p.90).

5

Turns on/off the power for all zones.

6

Adjusts the volume or mutes the audio output for the main zone. You can 
also switch the step for the volume adjustment.

7

Reloads the current status of this unit.

Web browser

Web control

PC

Router

This unit

Web control

3

4

1

2

5

6

7