Yamaha R-V1005 User Manual

31

Turn up the volume.

You will hear a test tone (like pink noise) from the left main
speaker, then the center speaker, then the right main
speaker, then the right rear speaker, and then the left rear
speaker, for about 2.5 seconds each.  The display changes
as shown below.

*

The state of the test tone output is also shown on the
monitor screen by an image of the audio listening room.
This is convenient for adjusting each speaker level.

*

If the function “1. CENTER SPEAKER” in the SET MENU
mode is set in the “NONE” position, you will hear the
center channel test tone from the left and right main
speakers.

Adjust the BALANCE control so that the effect sound
output level of the left main speaker and the right main
speaker are the same.

Adjust the sound output levels of the center speaker
and the rear speakers so that they become almost
the same as the main speakers.

How to adjust:
Pressing the 

or 

key adjusts the level to the

speaker (except the main speakers) currently
outputting the test tone.

* Pressing the 

key raises and the 

key lowers

the level.

* While adjusting, the test tone is fixed on the selected

speaker.

If desired, you can select a speaker to output the test
tone by pressing the 

or 

key once or more so

that “CENTER”, “R SUR.” or “L SUR.” appears on the
display.
* While holding the 

or 

key pressed, the test

tone is fixed on the selected speaker.

* “CENTER” shows the center speaker is selected, 

“R SUR.” shows the right rear speaker, and “L SUR.”
shows the left rear speaker.

* The output level of the selected speaker can be

adjusted by the 

or 

key.

Main (L)

Main (R)

Center

Rear (L)

Rear (R)

Remote control

Front panel

Remote control

Remote control

TEST  DOLBY  SUR.

EFFECT   LEVEL
CENTER      2dB

+