Yamaha RX-V359 User Manual

If you connected a recording component to the VCR OUT, 
or MD/CD-R OUT (REC) jacks, and you notice distortion 
or low volume during playback from other components, try 
turning on the recording component.

• Select “BASS” to adjust the low-frequency 

response.

• Select “TREBLE” to adjust the high-frequency 

response.

• Speaker and headphone adjustments are stored 

independently.

• When “TONE BYPASS” (see page 55) is set to “AUTO”, 

and “BASS” and “TREBLE” are set to 0 dB, audio output 
automatically bypasses the tone control circuitry of this 
unit. 

• If you increase or decrease the high-frequency or low-

frequency sound to an extreme level, the tonal quality of 
the surround speakers may not match that of the front left 
and right speakers.

• TONE CONTROL is not effective when the component 

connected to the MULTI CH INPUT jacks is selected as 
the input source (see page 25).

l

h

The name of the selected sound field program appears 
in the front panel display.
See page 31 for details about sound field programs.

• Choose a sound field program based on your listening 

preference, not merely on the name of the program.

• When you select an input source, this unit automatically 

selects the last sound field program used with the 
corresponding input source.

• Sound field programs cannot be selected when the 

component connected to the MULTI CH INPUT jacks is 
selected as the input source (see page 25).

• When sampling frequencies higher than 48 kHz are input, 

this unit is automatically set to the “STEREO” mode.

• To display information about the currently selected input 

source in the front panel display, see page 28 for details.

l

h

The Roxy Thtr