Yamaha RX-485 User Manual

9

Set to the “

∞

” position.

Select a desired input source.

*

The name of the selected input source will appear in the
display.

*

Note that pressing on each input selector button selects
the source which is connected to the corresponding input
terminals on the rear panel.

Select the speakers to be used.

*

If you use two speaker systems, press both the A and B
switches.

Play the source. (For detailed information on the tuning
operations, refer to the page 12.) 

Adjust to the desired output level.

If desired, adjust the BASS, TREBLE, BALANCE and
LOUDNESS controls, etc.  (Refer to page 11.)

●

If you select AUX, TUNER, CD or PHONO, be sure that
TAPE 1 and/or TAPE 2 are not being selected.

●

If you select TAPE 1 and TAPE 2 at the same time, the
result will be the sound from the tape deck 1.

●

For TAPE 1 and TAPE 2, whenever the button is pressed,
the corresponding input source is selected or canceled
alternately.

●

If both TAPE MONITOR and another input selector button
are selected, TAPE MONITOR has priority.