Yamaha RX-V475 User Manual

PLAYBACK

➤ Playing back music stored on media servers (PCs/NAS)

En

You can play back music files stored on your PC or 
DLNA-compatible NAS on the unit.

• To use this function, the unit and your PC must be connected to the same router 

(p.28). You can check whether the network parameters (such as the IP address) 
are properly assigned to the unit in “Information” (p.80) in the “Setup” menu.

• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC 

and FLAC files.

• The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC 

files, and 48 kHz for other files.

• To play back FLAC files, you need to install server software that supports sharing 

of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.

To play back music files stored on your PC or DLNA-compatible 
NAS, first you need to configure the media sharing setting on each 
music server.

■

■

Refer to the instruction manual for the device or software and 
configure the media sharing settings.

Follow the procedure below to operate the PC music contents and 
start playback.

You can control the PC/NAS with the menu displayed on the TV 
screen.

• Operations with TV screen are available only when your TV is connected to the 

unit via HDMI. If not, carry out operations while viewing the front display.

• “_” (underscore) will be displayed for characters not supported by the unit.

The browse screen is displayed on the TV.

• If playback of a music file selected from the unit is ongoing on your PC, the 

playback screen is displayed.