Yamaha RX-V1600 User Manual

y

• When MASTER ON/OFF is pressed inward to the ON 

position, you can also press POWER or STANDBY on the 
remote control to turn on or set this unit, Zone 2 and Zone 
3 to the standby mode simultaneously.

• For details about controlling Zone 2 and Zone 3 using the 

remote control, see page 106.

MAIN ZONE ON/OFF, ZONE 2 ON/OFF and ZONE 3 
ON/OFF on the front panel as well as POWER and 
STANDBY on the remote control are operational only when 
MASTER ON/OFF is pressed inward to the ON position.

Press MASTER ON/OFF on the front panel 
again to release it outward to the OFF 
position to turn off this unit.
This unit, Zone 2 and Zone 3 are turned off.

Follow the procedure below to change the impedance 
setting for all speakers.

If you are using 6 ohm speakers, set the impedance to 
6 ohms before using this unit.

Press and hold STRAIGHT (EFFECT) on the 
front panel and then press MASTER ON/OFF 
inward to the ON position to turn on the 
power of this unit.
SP IMP.–8

ΩMIN appears in the front panel display. 

• Select 6 ohms if you are using 6 ohm speakers.

Press MASTER ON/OFF on the front panel to 
release it outward to the OFF position to save 
the new setting and set this unit, Zone 2 and 
Zone 3 to the standby mode.
This unit will be set to the standby mode.

You can also set the speaker impedance by using the SP 
IMP. parameter in the ADVANCED SETUP menu (see 
page 90).

S P

I M P . - 8

M I N

A D V A N C E D   S E T U P