Yamaha RX-V757 User Manual
64
SET MENU
Use to manually adjust any speaker setting or compensate for
video signal processing delays when using LCD monitors or
projectors. Most of the SOUND MENU parameters are set
automatically when you run auto setup (see page 24).
video signal processing delays when using LCD monitors or
projectors. Most of the SOUND MENU parameters are set
automatically when you run auto setup (see page 24).
■
Speaker settings
A)SPEAKER SET
Use to manually adjust any speaker setting.
y
If you are not satisfied with the bass sounds from your speakers,
you can change these settings according to your preference.
you can change these settings according to your preference.
Front speakers
FRONT SP
Choices:
LARGE
, SMALL
•
Select SMALL if you have small front speakers. The
unit directs the low-frequency signals of the front
channel to the speakers selected with “LFE/BASS
OUT”.
unit directs the low-frequency signals of the front
channel to the speakers selected with “LFE/BASS
OUT”.
•
Select LARGE if you have large front speakers. The
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
unit directs the entire range of the front left and right
channel signals to the front left and right speakers.
Center speaker
CENTER SP
Choices: LRG,
SML
, NONE
•
Select LRG if you have a large center speaker. The unit
directs the entire range of the center channel signal to
the center speaker.
directs the entire range of the center channel signal to
the center speaker.
•
Select SML if you have a small center speaker. The unit
directs the low-frequency signals of the center channel to
the speakers selected with “LFE/BASS OUT”.
directs the low-frequency signals of the center channel to
the speakers selected with “LFE/BASS OUT”.
•
Select NONE if you do not have a center speaker. The
unit directs all of the center channel signal to the front
left and right speakers.
unit directs all of the center channel signal to the front
left and right speakers.
Surround left/right speakers
SUR. L/R SP
Choices: LRG,
SML
, NONE
•
Select LRG if you have large surround left and right
speakers. The entire range of the surround channel
signal is directed to the surround left and right
speakers.
speakers. The entire range of the surround channel
signal is directed to the surround left and right
speakers.
•
Select SML if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected with
“LFE/BASS OUT”.
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected with
“LFE/BASS OUT”.
•
Select NONE if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
mode (see page 36) and automatically set the surround
back speaker setting (SUR. B L/R SP) to NONE.
This will set the unit to the Virtual CINEMA DSP
mode (see page 36) and automatically set the surround
back speaker setting (SUR. B L/R SP) to NONE.
1 SOUND MENU
.A)SPEAKERSET
B)SPEAKERLEVEL
C)SPDISTANCE
D)EQUALIZER
[]/[]:Up/Down
[ENTER]:Enter
C)SPDISTANCE
D)EQUALIZER
[]/[]:Up/Down
[ENTER]:Enter
p
p
1 SOUND MENU 1/2
SMALL
)LARGE
FRONT SP
NONE
)SMLLRG
CENTER SP
NONE
)SMLLRG
SUR. L/R SP