Yamaha RX-V661 User Manual

You can use the automatic preset tuning feature to store up 
to 40 FM stations with strong signals (A1 to E8: 8 preset 
station numbers in each of the 5 preset station groups) in 
order. You can then recall any preset station easily by 
selecting the preset station number.

Rotate the I

INPUT selector on the front 

Press 3

FM/AM to select “FM” as the 

reception band.
“FM” appears in the front panel display.

Press and hold 6

MEMORY for more than 3 

seconds.
The preset station number as well as the MEMORY 
and AUTO indicators flashes. After approximately 5 
seconds, automatic presetting starts from the current 
frequency and proceeds toward higher frequencies.

When automatic preset tuning is completed, the front 
panel display shows the frequency of the last preset 
station.

y

• You can specify the preset number from which this unit 

stores FM stations. Press 4A/B/C/D/E and then 
5PRESET/TUNING/CH l / h repeatedly after you 
perform step 3 to select the preset station number under 
which the first station will be stored.

• You can begin tuning toward lower frequencies to store 

FM stations automatically. Press 2PRESET/TUNING 
so that the colon (:) disappears from the front panel 
display and then press 5PRESET/TUNING/CH l after 
pressing and holding 6MEMORY for more than 3 
seconds.

• Any stored station data existing under a preset station 

number is cleared when you store a new station under the 
same preset station number.

• If the number of received stations does not reach 40 (E8), 

automatic preset tuning automatically stops after 
searching for all the available stations.

• Only FM stations with sufficient signal strength are stored 

automatically by automatic preset tuning. If the station 
you want to store is weak in signal strength, tune into it 
manually and store it as described in “Manual preset 
tuning” below.

You can also store up to 40 stations (A1 to E8: 8 preset 
station numbers in each of the 5 preset station groups) 
manually.

Tune into a station.
See page 50 for tuning instructions.

Press 6

MEMORY on the front panel.

The MEMORY indicator flashes in the front panel 
display for approximately 10 seconds.

Press 4

A/B/C/D/E repeatedly to select a 

preset station group (A to E) while the 
MEMORY indicator is flashing.
The selected preset station group letter appears. 
Check that the colon (:) appears in the front panel 
display.

A1:FM88.9MHz

A:FM88.9MHz