Yamaha RX-V661 User Manual

y

Use this feature to activate the desired decoder manually when 
this unit cannot detect the signal flag encoded to the input sources 
correctly. 

• The available decoders vary depending on the setting of the 

speakers and the input sources.

• 6.1/7.1-channel playback is not possible in the following cases:

– when “SUR. L/R SP” (see page 73) or “SUR. B L/R SP” (see 

page 73) is set to “NONE”.

– when the component connected to the MULTI CH INPUT 

jacks is being played.

– when the source being played does not contain surround left 

and right channel signals.

– when a Dolby Digital KARAOKE source is being played.
– when this unit is in the stereo playback, Compressed Music 

Enhancer (see page 46) or Pure Direct (see page 48) mode.

– when “BI-AMP” is set to “ON” (see page 95).

• When this unit is turned off, this setting will be reset to 

“AUTO”.

Use this menu to reassign the input/output jacks, select the 
input mode or rename the input source.

■ Input/output assignment 

A)I/O ASSIGNMENT

Use this feature to assign the input/output jacks according 
to the component to be used if the initial settings of this 
unit do not correspond to your needs. Change the 
following parameters to reassign the respective jacks and 
effectively connect more components.
Once the input/output jacks are reassigned, you can select 
the corresponding component by using the INPUT 
selector on the front panel (or the input selector buttons on 
the remote control).

y

The input source name in parentheses indicates the default 
assigned input source.

CMPNT-V INPUT

Choices: [A] DVD, DTV/CBL, V-AUX, DVR, VCR

[B] DVD, DTV/CBL, V-AUX, DVR, VCR
[C] DVD, DTV/CBL, V-AUX, DVR, VCR

MANUAL SETUP

2 INPUT MENU

. A)I/O ASSIGNMENT

B)INPUT RENAME
C)VOLUME TRIM
D)DECODER MODE
E)MULTI CH SET
[ ]/[ ]:Up/Down
[ENTER]:Enter

p

p

INPUT MENU

CMPNT-V INPUT

. [A];;;;; DVD

(

DVD

)

[B]

;;;;;DTV/CBL

(DTV/CBL

)

)

[C]

;;;;; DVR

(

DVR

)