Yamaha RX-V661 User Manual

Use this menu to adjust the optional system parameters.

■ Display settings  A)DISPLAY SET

  DIMMER

Use this feature to adjust the brightness of the front panel 
display.
Control range: –

 

4 to 0

Control step: 1
• Press Dl to make the front panel display dimmer.
• Press Dh to make the front panel display brighter.

VIDEO CONV.

Use this feature to set whether to convert the video signals 
input at the VIDEO, S VIDEO and COMPONENT 
VIDEO jacks.
Choices: ON, OFF
• Select “ON” to convert composite, S-video and 

component video signals interchangeably.

• Select “OFF” not to convert any signals.

• This unit does not convert 480 line video signals and 576 line 

video signals interchangeably.

• The converted video signals are only output at the MONITOR 

OUT jacks. When recording a video source, you must make the 
same type of video connections between each component.

• When composite video or S-video signals from a VCR are 

converted to component video signals, the picture quality may 
suffer depending on your VCR.

• Unconventional signals input at the composite video or S-video 

jacks cannot be converted or may be output abnormally. In such 
cases, set “VIDEO CONV.” to “OFF”.

• When non-standard video signals (such as video signals from a 

game console) are input, this unit may not convert the signals 
even if you set “VIDEO CONV.” to “ON”.

  OSD SHIFT

Use this feature to adjust the vertical position of the OSD.
Control range: –5 (upward) to +5 (downward)
Control step: 1
Initial setting: 0
• Press Dl to raise the position of the OSD.
• Press Dh to lower the position of the OSD.

Source feature OSD display time 
OSD-SOURCE
Use this feature to set the amount of time to display the 
XM Satellite Radio information or iPod menu in the OSD 
after you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD continuously during 

an operation.

• Select “10s” to turn off the OSD 10 seconds after you 

perform a certain operation.

• Select “30s” to turn off the OSD 30 seconds after you 

perform a certain operation.

Amplifier function OSD display time 
OSD-AMP
Use this feature to set the amount of time to display the 
status and sound field parameters information screen after 
you perform a certain operation.
Choices: ON, 10s, 30s
• Select “ON” to display the OSD constantly during an 

operation.

• Select “10s” to turn off the OSD 10 seconds after you 

perform a certain operation.

• Select “30s” to turn off the OSD 30 seconds after you 

perform a certain operation.

  FL SCROLL

Use this feature to set whether to display the information 
(such as a song title or a channel name) in the front panel 
display in a continuous manner or by the first 14 
alphanumeric characters after scrolling all characters once 
when “XM” or “DOCK” is selected as the input source.
Choices: CONT, ONCE
• Select “CONT” to display the operation status in the 

front panel display in a continuous manner.

• Select “ONCE” to display the operation status in the 

front panel display by the first 14 alphanumeric 
characters after scrolling all characters once.

MANUAL SETUP

3 OPTION MENU

1/2

p

p

. A)DISPLAY SET

B)MEMORY GUARD
C)AUDIO SELECT
D)PARAM. INI

[ ]/[ ]:Up/Down
[ENTER]:Enter

MANUAL SETUP

3 OPTION MENU

2/2

p

p

. E)ZONE2 SET

F)XM RADIO SET
G)DOCK SET

[ ]/[ ]:Up/Down
[ENTER]:Enter

OPTION MENU

A)DISPLAY SET

1/2

. DIMMER;;;;;;;;;0

VIDEO CONV.

;;;ON

OSD SHIFT

;;;;;;0

[ ]/[ ]:Up/Down
[ ]/[ ]:Select

p

p

[

[

OPTION MENU

A)DISPLAY SET

2/2

. OSD-SOURCE;;;30s

OSD-AMP

;;;;;;30s

FL SCROLL

;;;CONT

[ ]/[ ]:Up/Down
[ ]/[ ]:Select

p

p

[

[