Yamaha RX-V1900BL User Manual

You can use the Parental Lock feature to limit the access 
to the desired SIRIUS Satellite channels. This unit 
automatically skips the locked channels when this unit is 
in the All Channel Search mode or Category Search mode 
and you search a channel by pressing 

GPRESET/

TUNING/CH l / h (or 8PRESET/CH k / n).

■ Setting the code number and the locking 

Use this feature to set the Parental Lock code number 
(PIN) and select the channels to be locked.

Press 7

BAND.

The "PARENTAL LOCK" screen appears.

If a SiriusConnect tuner is not connected to this unit, 
“Check Sirius Tuner” appears.

y

If the Parental Lock code number is already set, 
“PIN:___” appears instead of “NEW PIN:0000”. Refer to 
step 4 and then proceed the operations.

Enter the desired 4-digit code number by 
using the numeric buttons (A).

Press 8

ENTER to confirm the code number.

“OK” and then the SIRIUS Satellite Radio channel 
list appears. Refer to the step 5 and then proceed the 
operations.

Enter the 4-digit code number you set in step 
2 above to unlock the protection.
When the code number is correct, “OK” and then the 
SIRIUS Satellite Radio channel list appears.

Press 8l / h repeatedly to select the 
desired channel category and then press 
8

k / n repeatedly to select the channel you 

In the SIRIUS Satellite Radio channel list screen, this unit 
outputs the sound of the selected channel even if the 
channel is locked.

Press 8

ENTER to lock the selected 

channel.
Check mark appears before the locked channel.

y

When you select the locked channel and press 8ENTER, 
this unit unlocks the selected channel.

Repeat steps 5 and 6 to lock the channels 
you want.

Press 7

BAND to exit from the “PARENTAL 

LOCK” screen.
This unit is tuned into the last channel you select in 
the “PARENTAL LOCK” screen. If the channel is 
locked, this unit is tuned into “184 SIRIUS Weather 
& Emergency” or “000 Sirius ID”.

y

• If you forget or want to change the Parental lock code number, 

use “SIRIUS PIN” (page 103) to reset the Parental Lock code 
number.

• Selecting “ALL” in “INITIALIZE” (page 103) will cancel all 

parental locks.

■ Tuning into the locked channels

You can tune into the locked channels by the Direct 
number access mode or preset tuning mode. When you 
tune into the locked channel, following message appears 
in the front panel display. Enter the code number you set 
for the Parental Lock feature by using the numeric buttons 
(A) or press MENT to cancel the tuning.

 

• If the entered code number is incorrect, “Wrong” appears in the 

front panel display and this unit is tuned into the previously 
selected channel.

• If a channel is unlocked, you can also select the channel in Zone 

2 and Zone 3. 

Before performing the following operations, set the operation 
mode selector on the remote control to ESOURCE and then 
press 3SIRIUS.

PARENTAL LOCK

NEWPIN:0000

[

p]/[[]:Cursor

[0] [9]:Number

[ENT]:Enter

-

0 1 8

L O C K E D

P I N : _ _ _ _