Yamaha RX-V800 User Manual
29
English
INTR
ODUCTION
PREP
ARA
TION
B
ASIC
OPERA
TION
AD
V
ANCED
OPERA
TION
ADDITIONAL
INFORMA
TION
APPENDIX
BASIC PLAYBACK
EFFECT
■
Dolby Digital Matrix 6.1 or DTS
ES decoder
ES decoder
If you want to use the Dolby Digital Surround EX or DTS
ES software, press 6.1/ES to turn on the Dolby Digital
Matrix 6.1 or DTS ES decoder (see “12 6.1/ES AUTO”
on pages 42 and 58 for details).
ES software, press 6.1/ES to turn on the Dolby Digital
Matrix 6.1 or DTS ES decoder (see “12 6.1/ES AUTO”
on pages 42 and 58 for details).
Remote control
■
Virtual CINEMA DSP and SILENT
CINEMA DSP
CINEMA DSP
You can experience the virtual CINEMA DSP sound field
by setting “1C REAR L/R SP” on the SET MENU to
NONE. The sound field processing is changed to the
Virtual CINEMA DSP mode according to the selected
DSP program. Virtual CINEMA DSP is performed by
using the main speakers. You can also listen to SILENT
CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is
on.
by setting “1C REAR L/R SP” on the SET MENU to
NONE. The sound field processing is changed to the
Virtual CINEMA DSP mode according to the selected
DSP program. Virtual CINEMA DSP is performed by
using the main speakers. You can also listen to SILENT
CINEMA DSP by connecting your headphones to the
PHONES jack while the digital sound field processor is
on.
Note
• This unit is not set in the virtual CINEMA DSP mode even if
“1C REAR L/R SP” is set to NONE in the following cases:
– when the 5ch Stereo, DOLBY DIGITAL/Normal or DTS/
– when the 5ch Stereo, DOLBY DIGITAL/Normal or DTS/
Normal program is selected;
– when the sound effect is turned off;
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when the Dolby Digital KARAOKE source is played;
– when using the test tone; or
– when connecting the headphones.
– when 6CH INPUT is selected as the input source;
– when 96-kHz sampling digital signals are input to this unit;
– when the Dolby Digital KARAOKE source is played;
– when using the test tone; or
– when connecting the headphones.
Front panel
or
Remote control
y
• If the selector dial is set to a position other than the DSP/TUN
position, first press DSP and then EFFECT on the remote
control.
control.
Notes
• If you turn off the sound effect, no sound is output from the
center and rear speakers.
• If you turn off the sound effect while a Dolby Digital or DTS
signal is being output, the dynamic range of the signal is
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the main speakers.
automatically compressed and the sounds of the center and rear
speaker channels are mixed and output from the main speakers.
• The volume may be greatly reduced when you turn off the
sound effect or if you set “10B D-RANGE” on the SET MENU
to MIN. In this case turn on the sound effect.
to MIN. In this case turn on the sound effect.
Normal Stereo Reproduction
Press EFFECT to turn off the sound effect
for normal stereo reproduction.
for normal stereo reproduction.
Press EFFECT again to turn the sound effect back
on.
on.
DIGITAL
DTS
MOVIE THEATER 1
2
DSP
6.1/ES
PCM
PRO LOGIC
A
SP
B
D-TV/LD
CBL/SAT
VCR 1
VCR2/DVR
V-AUX
DVD
MD/TAPE
CD-R
TUNER
CD
PHONO
MD/TAPE
CD-R
TUNER
CD
PHONO
VIRTUAL
PS PTY RT CT
PTY HOLD EON STEREO AUTO
NEWS INFO AFFAIRS SPORT
MEMORY TUNED
NEWS INFO AFFAIRS SPORT
MEMORY TUNED
ZONE 2
VOLUME
SLEEP
The “
c
” indicator lights up.
0105V800_24-29_EN
8/25/0, 6:56 PM
29