Yamaha YSP-1 User Manual

Page of 70
10
INSTALLING THIS UNIT IN YOUR LISTENING ROOM
You can use the optional metal wall bracket to mount this 
system on your listening room wall.
For details on how to attach the metal bracket to the wall 
or how to attach this system to the metal bracket, refer to 
the instructions supplied with the bracket.
You can mount your TV on the stand placed on a 
commercially available rack to install this unit under your 
TV.
For details on how to attach the stand or how to attach this 
system to your TV, refer to the instructions supplied with 
the stand.
You can install this system either above or under your TV 
in a commercially available rack.
Before installing, make sure that the rack is large enough 
to allow adequate ventilation space around this unit, and 
that it is strong enough to support the weight of both this 
unit and your TV.
To affix this unit, remove the protection pads from the 
bottom of the unit, then secure the supplied fasteners (4 
pieces) to the bottom four corners of this unit and the top 
of the rack, etc. as shown below.
• Do not install this unit on top of a slanted surface. This unit may 
fall over and cause injury.
• Make sure you wipe the surface of the rack, etc. before securing 
the fasteners. Appling the tape to a dirty or wet surface will 
weaken the sticking power of the tape, and this unit may fall as 
a result.
Using a metal wall bracket
Using a stand
YSP-1
TV
Metal wall bracket
TV
YSP-1
Stand
Using a rack
Affixing this unit
Notes
TV
When the YSP-1 is 
installed above your TV
When the YSP-1 is 
installed under your TV
YSP-1
Remove the 
protection 
pads
Peel off 
the film
Fasteners