Yamaha RX-V557 User Manual

Page of 84
53
English
SET MENU
A
D
V
ANCED 
OPERA
TION
Input rename
 C)INPUT RENAME
Use this feature to change the name of the inputs in the 
front panel display.
1
Press an input selector button to select the 
input you want to change the name of.
2
Press AMP.
3
Press 
j
 / 
i
 to place the _ (under-bar) under 
the space or the character you want to edit.
4
Press 
u
 / 
d
 to select the character you want, 
then use 
j
 / 
i
 to move to the next space.
• You can use up to 8 characters for each input.
• Press d to change the character in the following 
order, or press u to go in the reverse order: 
A to Z, a space, 0 to 9, a space, a to z, a space, 
symbols (#, *, –, +, etc.).
5
Repeat steps 1 through 4 to rename each 
input.
6
To exit, press SET MENU when finished.
Use to adjust the optional system parameters.
Display settings
 A)DISPLAY SET
Dimmer
  DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 
0
Video conversion
  V. CONV.
Use this feature to turn on/off conversion of composite 
(VIDEO) signals to S-video signals. This allows you to 
output converted video signals from the S VIDEO jacks 
when no S-video or component signals are input. This 
feature also converts S-video signals to component signals 
when no component signals are input.
Choices: 
ON
, OFF
Select OFF not to convert any signals (except S-video 
signals to composite signals). 
Select ON to convert composite signals to S-video and 
component signals, and to convert S-video signals to 
component signals.
Regardless of the setting, S-video signals are always 
converted to composite signals.
• Converted video signals are only output to the MONITOR OUT 
jacks. When recording you must make the same type of video 
connections (i.e., S-video) between each component.
• When converting composite video or S-video signals from a 
VCR to component signals, the picture quality may suffer 
depending on your VCR.
Memory guard
 B)MEMORY GUARD
Use this feature to prevent accidental changes to DSP 
program parameter values and other system settings.
Choices: ON, 
OFF
Select ON to protect:
DSP program parameters
All SET MENU items
All speaker levels
When “MEMORY GUARD” is set to ON, you cannot use 
the test tone or select any other SET MENU items.
3 OPTION MENU
Notes