Yamaha RX-V557 User Manual

REMOTE CONTROL FEATURES

You can select the unit you want to operate with the
remote control by entering the library code.

Press CODE SET using a ballpoint pen or
similar object.

The TRANSMIT indicator on the remote control
flashes twice.

Enter the code number “9991” or “9992” (see
the table below).

The TRANSMIT indicator on the remote control
flashes twice, and the library code is changed.

When using multiple YAMAHA receivers/amplifiers, you
may be able to operate the other components simultaneously
with the default code setting. In this case, set one of the
alternative codes to operate this unit separately.

You must also make settings for the receiver/amplifier.

Press an input selector button or

select the component control for which you
want to clear the remote control code.

Press CODE SET using a ballpoint pen or
similar object.

The TRANSMIT indicator on the remote control
flashes twice.

Enter the code number “0000”.

The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is cleared.

• If you do not press any button within 30 seconds after step 2,

the clearing process is canceled. If this happens, start over from
step 1.

• You can clear all setup remote control codes at once by entering

the code number “9990”.

Switching library codes

AMP library

code

(remote

control

setting)

Function

Remote

control ID

(unit

setting,

see

page 56)

9991

To operate this unit using the
default code.

ID1

(initial

setting)

9992

To operate this unit using an
alternative code.

ID2

Note

TRANSMIT

CODE SET

Clearing set up remote control
codes

MD/CD-R

TUNER

V-AUX

DVD

AMP

VCR

DTV/CBL

MULTI CH IN

SLEEP

TRANSMIT

CODE SET