Yamaha RX-Z7 User Manual
115
En
Remote control features
AD
V
ANCED
OPERA
T
ION
■ Selecting a component to be controlled
You can select a component to be controlled
independently of the input source selected with the input
selector buttons (3).
independently of the input source selected with the input
selector buttons (3).
Press 5
SELECT l / h repeatedly to select the
desired component.
The name of the component to be controlled appears in the
display window (4) on the remote control.
The name of the component to be controlled appears in the
display window (4) on the remote control.
■ Controlling optional components
(Option mode)
“OPTN1” and “OPTN2” are optional component control
areas that can be programmed with remote control
functions independently from any input source. These
areas are useful for programming commands that are to be
used only as a part of a macro function or for components
that do not have a valid remote control code.
areas that can be programmed with remote control
functions independently from any input source. These
areas are useful for programming commands that are to be
used only as a part of a macro function or for components
that do not have a valid remote control code.
To select the option mode, press 5
SELECT l /
h repeatedly until “OPTN1” or “OPTN2” appears
in the display window (4) on the remote control.
in the display window (4) on the remote control.
You cannot set a remote control code for the optional areas. See
page 118 to program buttons operated within this component
control area.
page 118 to program buttons operated within this component
control area.
Use the setup mode of the remote control to customize the
remote control.
remote control.
1
Press G
SETUP on the remote control using
a ballpoint pen or similar object.
“SETUP” appears in the display window on the
remote control.
“SETUP” appears in the display window on the
remote control.
2
Press 9k / n repeatedly to select the desired
setup mode.
setup mode.
3
After the configurations, press G
SETUP
again to exit from the setup menu.
If you do not complete each of the operations within 30
seconds, this unit automatically exits from the setup menu.
seconds, this unit automatically exits from the setup menu.
Note
DVD
or
OPTN1
OPTN2
Customizing the remote control
Setup
mode
Descriptions
Page
SETUP
Top setup mode menu.
—
LEARN
Learning mode. Use this feature to program
codes from other remote controls.
codes from other remote controls.
P-SET
Preset mode. Use this feature to change the
remote control code of each control area.
remote control code of each control area.
RNAME
Renaming mode. Use this feature to change
the name of each control area.
the name of each control area.
MACRO
Macro programming mode. Use this
feature to set the macro program.
feature to set the macro program.
CLEAR
Clearing mode. Use this feature to clear the
configurations of this unit.
configurations of this unit.
ERASE
Erase mode. Use this feature to erase the
learned functions of each button.
learned functions of each button.
EX-IR
Extended IR code mode. This feature is for
the authorized custom installers only.
the authorized custom installers only.
—
LIGHT
Backlight mode. Use this feature to set the
light up mode of the remote control.
light up mode of the remote control.
Note