Yamaha RX-Z7 User Manual

Press 9

ENTER to start pairing.

The connected Bluetooth receiver starts searching 
Bluetooth components.

Check that the Bluetooth component detects 
the Bluetooth receiver.
For details, refer to the instruction manual of the 
Bluetooth component.

Select the Bluetooth receiver in the 
Bluetooth device list and then enter the pass 
key “0000” on the Bluetooth component.
Once this unit completes the pairing successfully, 
“Completed” appears.

Press 9l to return to the previous menu 
level.

If the connected Bluetooth receiver cannot find any 
Bluetooth components, “Not found” appears.

■ Connect (Bluetooth connection)

Use this feature to establish a connection between the 
Yamaha Bluetooth receiver (such as YBA-10, sold 
separately) and your Bluetooth component.

Pairing must be performed when using a Bluetooth component 
with the Bluetooth receiver connected to this unit for the first 
time of if the pairing data has been deleted.

Press 9

ENTER to establish a connection.

The connected Bluetooth receiver starts searching 
Bluetooth components. Once the connection is established 
successfully, “BT Connected” appears.

If the connected Bluetooth receiver cannot find any Bluetooth 
components, “Not found” appears.

y

To terminate the connection, press 9ENTER again.

■ USB Select (USB port select)

Selects the component connected to the front or rear USB 
port as the input source (page 28).

Use this feature to browse the music contents of iPod, 
USB component, PC/MusicCAST, Internet radio and 
Rhapsody

®

 (U.S.A. model only). See the following pages 

for details.

• iPod (page 73)

• USB (page 75)

• PC/MCX (page 75)

• NET RADIO (page 75)

• Rhapsody (page 75)

Selects the component connected to the front 
USB port as the input source.

Rear

Selects the component connected to the rear 
USB port as the input source.