Yamaha RX-V2400 User Manual
53
English
SET MENU
A
D
V
ANCED
OPERA
T
ION
■
Headphone tone control
HP TONE CTRL
Use to adjust the amount of bass and treble output to your
headphones.
To access these parameters, select:
MANUAL SETUP > SOUND MENU > HP TONE CTRL
>
headphones.
To access these parameters, select:
MANUAL SETUP > SOUND MENU > HP TONE CTRL
>
• Use BASS to adjust the headphone bass level.
• Use TRBL to adjust the headphone treble level.
Choices: –6 to +6 (dB), Initial: 0 dB
• Use TRBL to adjust the headphone treble level.
Choices: –6 to +6 (dB), Initial: 0 dB
■
Audio set
AUDIO SET
Use to customize this units overall audio settings.
To access these parameters, select:
MANUAL SETUP > SOUND MENU > AUDIO SET
To access these parameters, select:
MANUAL SETUP > SOUND MENU > AUDIO SET
Mute
MUTE
Use to adjust how much the mute function reduces the
output volume.
Choices:
output volume.
Choices:
MUTE
, –20dB
• Select MUTE to completely halt all output of sound.
• Select
• Select
–
20dB to reduce the current volume by 20dB.
Delay
DELAY
Use to delay the sound output and synchronize it with the
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices:
video image. This may be necessary when using certain
LCD monitors or projectors.
Choices:
0
to 240 (ms)
Dialog lift
DIALG.LIFT
Use to turn on/off the DIALG.LIFT parameter (see
page 80). This parameter adjusts the height of the front
and center channel sounds (dialog, vocals, etc.) by
assigning some of the front and center channel elements to
the presence speakers.
Choices: ON,
page 80). This parameter adjusts the height of the front
and center channel sounds (dialog, vocals, etc.) by
assigning some of the front and center channel elements to
the presence speakers.
Choices: ON,
OFF
• Select ON to turn on DIALG.LIFT effect.
• Select OFF to turn off DIALG.LIFT effect.
• Select OFF to turn off DIALG.LIFT effect.
DIALG.LIFT
appears only when
PRESENCE SP
is set to
PRESENCE
(see page 28).
■
Presence/surround back channel select
PR/SBch SELECT
You can select to prioritize either the surround back or
presence speakers when playing sources that contain
surround back channel signals using CINEMA DSP sound
field programs.
MANUAL SETUP > SOUND MENU > PR/SBch SELECT
>
presence speakers when playing sources that contain
surround back channel signals using CINEMA DSP sound
field programs.
MANUAL SETUP > SOUND MENU > PR/SBch SELECT
>
Choices: PRch,
SBch
• Select SBch to use surround back speakers when a
surround back channel signal is detected in a CINEMA
DSP program. Presence channel signals will be output
from front speakers.
DSP program. Presence channel signals will be output
from front speakers.
• Select PRch to use presence speakers even when
surround back channel signals are input. The signals
for the surround back channel will be output from
surround speakers.
for the surround back channel will be output from
surround speakers.
Note
. BASS
TRBL
-
+
0dB
/
: Up/Down
-/+ : Adjust
H)HP TONE CTRL
/
: Exit
p
p
-/+ : Select
. AUDIO MUTE;;MUTE
AUDIO DELAY;;0ms
DIALG.LIFT;;;OFF
I)AUDIO SET
/
: Exit
p
p
-/+ : Select
PRch [SBch
J)PR/SBch SELECT
00_RX-V2400U_EN.book Page 53 Friday, October 10, 2003 10:54 AM