Yamaha RX-V2400 User Manual
85
English
TROUBLESHOOTING
ADDITIONAL
INFO
RMA
T
IO
N
N
■
Remote control
Problem
Cause
Remedy
Refer to
page
The remote control
does not work nor
function properly.
does not work nor
function properly.
Wrong distance or angle.
The remote control will function within a maximum
range of 6 m (20 feet) and no more than 30 degrees
off-axis from the front panel.
range of 6 m (20 feet) and no more than 30 degrees
off-axis from the front panel.
7
Direct sunlight or lighting (from an
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
inverter type of fluorescent lamp, etc.) is
striking the remote control sensor of this
unit.
Reposition this unit.
—
The batteries are weak.
Replace all batteries.
3
The manufacture code has not correctly
set.
set.
Set the manufacturer code correctly.
60
Try to set the other codes of the same manufacturer.
60
Even if the manufacturer code is correctly
set, there are some models that do not
respond to the remote control.
set, there are some models that do not
respond to the remote control.
Program the necessary functions independently into
the programmable buttons using the Learn feature.
the programmable buttons using the Learn feature.
61
The remote control
does not “learn” new
functions.
does not “learn” new
functions.
The batteries of this remote control and/or
the other remote control are too weak.
the other remote control are too weak.
Replace the batteries.
3
The distance between the two remote
controls is too much or too little.
controls is too much or too little.
Place the remote controls at the proper distance.
61
The signal coding or modulation of the
other remote control is not compatible
with this remote control.
other remote control is not compatible
with this remote control.
Learning is not possible.
—
Memory capacity is full.
Delete other unnecessary functions to make room for
the new functions.
the new functions.
65, 66
00_RX-V2400U_EN.book Page 85 Friday, October 10, 2003 10:54 AM