Yamaha RX-V861 User Manual

Press B

MASTER ON/OFF inward to the ON 

Press F

SCENE1 button.

“DVD Viewing” appears in the front panel display, 
and this unit automatically optimize own status for 
the DVD playback.

y

The indicator on the selected SCENE button lights up while 
this unit is in the SCENE mode.

y

If the connected DVD player is a Yamaha product and has 
capability of the SCENE control signals with the REMOTE 
OUT jack of this unit (see page 23), this unit can 
automatically activate the DVD player and start playback 
when you press the FSCENE1 button. Refer to the 
instruction manual of the DVD player for further 
information.

Rotate 0

VOLUME to adjust the volume.

When you change the input source or sound field program, 
the SCENE mode is deactivated, and the indicator on the 
selected SCENE button turns off.

■ Using the other SCENE buttons
In the following cases, try pressing the corresponding 
SCENE button to enjoy the playback of the desired 
sources.

Case A: “I want to listen to a music disc from the 

connected DVD player as the background 
music for this room...”

 Press F

SCENE2 (or 

F

SCENE2) to select “Disc 

Case B: “I want to watch a TV program...”

 Press F

SCENE3 (or 

F

SCENE3) to select “TV 

To use the “TV Viewing” template (Case B), you must 
connect a satellite receiver, a cable TV receiver or an HDTV 
decoder to this unit in advance. See page 20 for details.

Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set “SP IMP.” to 
“6

Ω MIN” before using this unit (see page 25). 4 ohm 

speakers can be also used as the front speakers (see 
page 94).