Yamaha RX-V861 User Manual

Optimizing the speaker setting for your listening room

PRE

ARA

ION

English

Press Dl / h repeatedly to toggle between
the setup result displays.

Press Dk / n to toggle between the parameters in a
results.

If you are not satisfied with the results or want to manually
adjust each parameter, use “MANUAL SETUP” (see
page 69).

• The distances displayed in the “DISTANCE” results may

be longer than the actual distance depending on the
characteristics of your subwoofer.

• In the “EQ” results, different values may be set for the

same frequency to provide finer adjustments.

Press D

ENTER to return to the top

“AUTO:RESULT” display.

Make sure the pointer is pointing at “SET”
and “CANCEL” and then press Dl / h to
select “SET” or “CANCEL”.

Choices: SET, CANCEL
• Select “SET” to confirm the “AUTO SETUP”

results.

• Select “CANCEL” to cancel the “AUTO SETUP”

results.

Press D

ENTER to confirm your selection.

The top “SET MENU” display appears in the OSD.

Press N

SET MENU to exit from “SET

MENU”.

Disconnect the optimizer microphone from
this unit.
The optimizer microphone is sensitive to heat. Keep it
away from direct sunlight and do not place it on top
of this unit.

If you change speakers, speaker positions, or the layout of
your listening environment, run “AUTO SETUP” again to
recalibrate your system.

Notes

Results of the speaker
connection and wiring

Results of the speaker
distance from the
listening position

Results of the setting of
each speaker size

Results of the parametric
equalizer of each speaker

Results of the speaker
output level

AUTO:RESULT

RESULT

3/4/0.1

DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB

. SET CANCEL

[ ]/[ ]:Up/Down
[ENTER]:Enter

AUTO:RESULT

RESULT

3/4/0.1

DIST: 14.0/17.0ft
LVL : -9.0/+6.5dB

. SET CANCEL

[ ]/[ ]:Up/Down
[ENTER]:Enter

SET MENU

. ;AUTO SETUP

;MANUAL SETUP

.A;SIGNAL INFO

[ ]/[ ]:Up/Down
[ENTER]:Enter