Yamaha RX-V861 User Manual

You can use this feature to store up to 40 XM Satellite 
Radio channels (A1 to E8: 8 preset channel numbers in 
each of the 5 preset channel groups). You can then recall 
any preset channel easily by selecting the preset channel 
group and number as described in “Preset Search mode” 
on page 55.

Search for a channel you want to set as a 
preset channel by using one of the XM 
Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on 
page 54 for details.

Press 6

MEMORY (or EXM MEMORY).

The MEMORY indicator flashes in the front panel 
display for approximately 10 seconds.

You must proceed to and carry out steps 3 through 5 while 
the MEMORY indicator is flashing in the front panel 
display.

Press 4

CATEGORY (or DA-E/CAT. l / h) 

repeatedly to select a preset channel group 
(A to E) while the MEMORY indicator is 
flashing. 
The preset channel group letter appears in the front 
panel display.

Press 5

PRESET/TUNING/CH l / h 

(or D

PRESET/CH k / n) repeatedly to select 

a preset channel number (1 to 8) while the 
MEMORY indicator is flashing.
The preset channel number appears in the front panel 
display.

Press 6

MEMORY (or EXM MEMORY) to 

set the selected XM Satellite Radio channel 
as a preset channel while the MEMORY 
indicator is flashing.
A colon (:) appears next to the preset channel number 
for confirmation, and the MEMORY indicator turns 
off in the front panel display.

 

Once you set a new preset channel, the one previously 
stored in the same preset channel group and number is 
cleared.

Before performing the following operations, set the operation 

mode selector on the remote control to 

K

SOURCE.

[043] XMU

C  [043] XMU

C5 [043] XMU

C5:[043] XMU