Yamaha RX-V575 User Manual

CONFIGURATIONS

➤ Configuring various functions (Setup menu)

En

Enables/disables CINEMA DSP 3D.

Enables/disables the broadening effect of the front sound field.

Adjusts the broadening effect of the center sound field.

Adjusts the difference in level between the front and surround sound fields.

Adjusts the center orientation level (broadening effect) of the front sound field.

Selects the method to adjust the delay between video and audio output.

Adjusts the delay between video and audio output manually.

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.

Sets the maximum volume to prevent excessive loudness.

Sets the initial volume for when this receiver is turned on.

(RX-V575 only)
Selects whether to adjust the volume for Zone B in conjunction with the volume for Zone A.

Sets the amount of time for the auto-standby function.

Enables/disables the eco mode (power saving mode).

Changes the input source name displayed on the front display.

Adjusts the brightness of the front display.

Prevents accidental changes to the settings.

Selects how to supply power through the DC OUT jack.

Displays the network information on the unit.

Configures the network parameters (such as IP address).

Sets the MAC address filter to limit access to the unit from other network devices.

Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.

Selects whether to enable/disable the function that turns on the unit from other network devices.

Edits the network name (the unit’s name on the network) displayed on other network devices.

Updates the firmware via the network.

Select an on-screen menu language.