Yamaha RX-V563 User Manual

Connect one of the type of the audio jack(s) and/or video jack(s) that your input components are equipped with.

■ Audio jacks

This unit has three types of audio jacks. Connection 
depends on the availability of audio jacks on your other 
components.

AUDIO jacks
For conventional analog audio signals transmitted via left 
and right analog audio cables. Connect red plugs to the 
right jacks and white plugs to the left jacks.

DIGITAL AUDIO COAXIAL jacks
For digital audio signals transmitted via coaxial digital 
audio cables.

DIGITAL AUDIO OPTICAL jacks
For digital audio signals transmitted via optical digital 
audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and 

DTS bitstreams. Optical input jacks are compatible with digital 
signals with up to 96 kHz of sampling frequency.

• This unit handles digital and analog signals independently. Thus 

audio signals input at the digital jacks are not output at the 
analog AUDIO OUT (REC) jacks.

■ Video jacks

This unit has three types of video jacks. Connection 
depends on the availability of input jacks on your video 
monitor.

VIDEO jacks
For conventional composite video signals transmitted via 
composite video cables.

S VIDEO jacks
For S-video signals, separated into the luminance (Y) and 
chrominance (C) video signals transmitted on separate 
wires of S-video cables.

COMPONENT VIDEO jacks
For component signals, separated into the luminance (Y) 
and chrominance (P

B

, P

R

) video signals transmitted on 

separate wires of component video cables.

The OSD signal is not output at the DVR OUT (REC) jacks.

P

B

P

R

Y

S

V

R

L

C

O

R

L

(Red)

(White)

(Orange)

(Yellow)

(Red)

(Blue)

(Green)

Video conversion ON 
(see page 73)

01EN_RX-V563_U.book  Page 13  Thursday, January 31, 2008  10:28 AM