Yamaha RX-V563 User Manual

Page of 114
46
 En
FM/AM tuning
You can use the automatic preset tuning feature to store 
FM stations with strong signals up to 40 (A1 to E8: 8 
preset station numbers in each of the 5 preset station 
groups) of those stations in order. You can then recall any 
preset station easily by selecting the preset station number.
1
Press 
R
INPUT l / h repeatedly so that 
“TUNER” is displayed in the front panel 
display.
2
Press E
BAND to select “FM” as the 
reception band.
3
Press and hold 
H
MEMORY for more than 3 
seconds.
The preset station number as well as the MEMORY 
and AUTO indicators flashes. After approximately 5 
seconds, automatic presetting starts from the current 
frequency and proceeds toward the higher 
frequencies.
When automatic preset tuning is completed, the front 
panel display shows the frequency of the last preset 
station.
y
You can select the preset station group and the preset station 
number where the first received station will be stored by pressing  
FA/B/C/D/E and then GPRESET/TUNING/CH l / h.
• Any stored station data existing under a preset station number is 
cleared when you store a new station under the same preset 
station number.
• Only FM stations with sufficient signal strength are stored 
automatically by automatic preset tuning. If the station you 
want to store is weak in signal strength, tune into it manually 
and store it as described in “Manual preset tuning” on this page.
You can also store up to 40 stations (A1 to E8: 8 preset 
station numbers in each of the 5 preset station groups) 
manually.
1
Tune into a station automatically or manually.
See page 45 for tuning instructions.
2
Press 
H
MEMORY.
The MEMORY indicator flashes in the front panel 
display for approximately 30 seconds.
3
Press F
A/B/C/D/E and GPRESET/
TUNING/CH l / h repeatedly to select a 
preset station group (A1 to E8) while the 
MEMORY indicator is flashing.
Check that the colon (:) appears in the front panel 
display.
4
Press 
H
MEMORY while the MEMORY 
indicator is flashing.
The station band and frequency appear in the front 
panel display with the preset station group and 
number you have selected.
• Any stored station data existing under a preset station number is 
cleared when you store a new station under the same preset 
station number.
• The reception mode (stereo or monaural) is stored along with 
the station frequency.
Automatic preset tuning
Notes
AUTO
MEMORY
A1:FM 88.9 MHz
Flashes
Flashes
Manual preset tuning
Notes
MEMORY
A3:FM 88.9 MHz
Preset station
group and
number
Flashes
Colon (:)
TUNED
A1:FM 88.9 MHz
The displayed station has been stored as A1.
01EN_RX-V563_U.book  Page 46  Thursday, January 31, 2008  10:28 AM