Yamaha RX-V692RDS User Manual

22

Set to the “

∞

” position.

Turn the power on.

Select the main speakers to be used.

* If you use two main speaker systems, press both the A

and B switches.

Set to the “0” position.

Set to the “OFF (

)”.

This procedure lets you adjust the sound output level balance between the main, center, and rear speakers using the built-in test
tone generator.  When this adjustment is performed, the sound output level heard at the listening position will be the same from
each speaker.  This is important for the best performance of the digital sound field processor and the Dolby Pro Logic Surround
decoder.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.

: Provided for RX-V692RDS only.