Yamaha X-V2600 User Manual

Sound output from each speaker depends on the type of audio signals being input. Refer to the following diagrams in the 
table below to understand the speaker layout for each sound field program.

Be advised that there may be no or not enough sound output from speakers depending on the type of input source being played back. 
Furthermore, there may be some channels that can only be used partially when they are adjusted to specific aspects of movies, such as 
special sound effects, etc.

The abbreviations and symbols used in each diagram are as follows:

*1

When the q EX / q PL IIx / ES indicators are turned off

*2

When the q EX / q PL IIx / ES indicators are lit up and PR/SB Priority is set to Presence (see page 86)

*3

When the q EX / q PL IIx / ES indicators are lit up and PR/SB Priority is set to Surround Back (see page 86)

Front left speaker

Presence left speaker

Surround right speaker

Center speaker

Presence right speaker

Surround back left speaker

Front right speaker

Surround left speaker

Surround back right speaker

Speaker from which sound is being output

Speaker from which no sound is being output

when surround back speakers are connected

when surround back speakers are not connected