Yamaha RX-V3300 User Manual
70
SET MENU
13 DISPLAY SET
■ DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
Initial setting: 0
■ OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Initial setting: 0
Press + to lower the position of the OSD.
Press – to raise the position of the OSD.
Press – to raise the position of the OSD.
■ GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
a gray background when there’s no video signal input.
Nothing is displayed on the screen including the on-
screen display if OFF is selected.
Choices: AUTO, OFF
Initial setting: AUTO
Initial setting: AUTO
Note
• If “GRAY BACK” is set to OFF, no information will be
displayed on the screen when video signals are not being input.
■ V CONV. (Video conversion)
Use this feature to turn on/off the function to convert
composite signals to S-video signals to output through the
S-video jack when no S-video signals are input.
composite signals to S-video signals to output through the
S-video jack when no S-video signals are input.
Choices: ON, OFF
Initial setting: OFF
Initial setting: OFF
OFF
Select this not to convert composite signals to S-video
signals.
Select this not to convert composite signals to S-video
signals.
ON
Select this to convert composite signals to S-video
signals.
Select this to convert composite signals to S-video
signals.
13 DISPLAY SET
O S D
S H I F T … … … … … … 0
≥
D I M M E R … … … … … … … … … 0
G R A Y
B A C K … … … A U T O
V
C O N V . … … … … … … O F F
12 SP DELAY
M A I N
L / R … … 1 0 . 0 f t
C E N T E R … … … … 1 0 . 0 f t
R E A R
R E A R
L / R … … 1 0 . 0 f t
≥
U N I T … … … … … … … … f e e t
R E A R
C T … … … … 7 . 0 f t
■ Setting by “msec”
Control range:
0 to 5.0 ms (for center), 0 to 30.0 ms
(for rear center)
(for rear center)
Initial settings:
0 ms (for center), 3.0 ms (for rear
center)
center)
■ Setting by “meters”
Control range:
0.15 to 30.00 m (for main L/R,
center, rear L/R, rear center)
center, rear L/R, rear center)
Initial settings:
3.00 m (for main L/R, center, rear L/
R), 2.10 m (for rear center)
R), 2.10 m (for rear center)
■ Setting by “feet”
Control range:
0.5 to 100 ft (for main L/R, center,
rear L/R, rear center)
rear L/R, rear center)
Initial settings:
10.0 ft (for main L/R, center, rear L/
R), 7.0 ft (for rear center)
R), 7.0 ft (for rear center)
Note
• No delay will be set if the same distance is set for the main L/R
and center, or the rear L/R and rear center with “meters” or
“feet” selected.
“feet” selected.
12 SP DELAY
C E N T E R … … … … … 0 . 0 m s
R E A R
R E A R
C T … … … … 3 . 0 m s
≥
U N I T … … … … … … … … m s e c
12 SP DELAY
M A I N
L / R … … … 3 . 0 0 m
C E N T E R … … … … … 3 . 0 0 m
R E A R
R E A R
L / R … … … 3 . 0 0 m
≥
U N I T … … … … … … m e t e r s
R E A R
C T … … … … 2 . 1 0 m
0109V3300_60-74_EN(UA)
02.7.24, 6:07 PM
70