Yamaha D5000 User Manual

Press the 

[ UTILITY ] key to select the PARAMETER DISPLAY command.

Change the 

MODE

 from "

NORMAL

" to "

DETAIL(AUTO)

" or 

"

DETAIL(HOLD)

" by rotating the DATA ENTRY encoder.

When the PARAMETER DISPLAY is set to "

DETAIL(AUTO)

" or "

DETAIL(HOLD)

", the parameters 

are displayed in a large, easy-to-read font in a pop-up sub-window. A bar graph is also displayed, 
giving you a visual indication of the parameter’s status.

If the value is set to "

DETAIL(AUTO)

", the pop-up sub-window will be 

displayed on the LCD as long as you are adjusting the parameter. It will 
disappear if you press one of the 

[ < ] or [ > ] CURSOR buttons, or after 3 

seconds have passed without further rotation of the DATA ENTRY 
encoder.

If it is set to "

DETAIL(HOLD)

", the pop-up sub-window will remain 

displayed until you press one of the 

[ < ] , [ ^ ] , [ > ] , or [ % ] CURSOR 

buttons, or select another function.

The advantage of this feature will become apparent the first time you work on an effect in a dimly-
lit recording studio or concert hall.

Press the 

[ UTILITY ] key to select the FOOT SW (footswitch) FUNCTION 

command.

Use the 

[ ^ ] and [ % ] CURSOR keys to move through the various 

parameters. Modify the selected parameter by rotating the DATA ENTRY 
encoder.

BYP/PGM

 (

PROGRAM

/

BYPASS

) Sets the function of the BYPASS - PROGRAM INC/DEC 

footswitch jack.

BYPASS

The footswitch duplicates the function of the

[ BYPASS ] key.

PROGRAM

The footswitch allows you to select between a pre-
determined range of program numbers.

FROM

 (1 ~ 00)

When 

PROGRAM

 is selected, use this item to set the starting 

program number. If 

BYPASS

 is selected, this parameter does not 

appear.

TO

 (1 ~ 00)

When 

PROGRAM

 is selected, use this item to set the last program 

number. If 

BYPASS

 is selected, this parameter does not appear.