Yamaha AVENTAGE RX-A3020 User Manual

CONFIGURATIONS

➤ Configuring the system settings (ADVANCED SETUP menu)

En

Once the remote control ID is registered successfully, “OK” appears in the display 
window.

If “ERROR” appears, registration failed. Repeat from step 3.

• The registered remote control codes (p.136) are not cleared even if you change the remote control ID.

(Asia and General models only)

Change the FM/AM tuning frequency setting of the unit depending on your country or 
region.

Switch the video signal type of the unit so that it matches to the format of your TV.

NTSC, PAL

U.S.A., Canada, Korea and General models: NTSC

Other models: PAL

The unit automatically detects resolutions supported by a TV connected to the HDMI 
OUT jack.

Disable the monitor check function if you want to specify a resolution in “Resolution” 
(p.120) when the unit cannot detect the TV’s resolution or when you want to specify a 
different resolution than the detected resolution.

• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV 

after “MONITOR CHECK” has been set to “SKIP”.

FM100/AM10

Select this when you want to adjust the FM frequency by 100-kHz 
steps and AM by 10-kHz steps.

FM50/AM9 (default)

Select this when you want to adjust the FM frequency by 50-kHz steps 
and AM by 9-kHz steps.

      F M 5 0 / A M 9

T U N E R  F R Q  S T E P

SPIMP.-

          N T S C

  T V  F O R M A T

YES (default)

Enables the monitor check function. (Outputs video signals with a 
resolution supported by the TV only.) 

SKIP

Disables the monitor check function. (Outputs video signals with a 
specified resolution regardless of compatibility with the TV.)

SPIMP.-

           Y E S

M O N I T O R  C H E C K