Yamaha AVENTAGE RX-A3020 User Manual

PREPARATIONS

➤ Connecting a TV

En

❑ Necessary settings

To use HDMI Control and ARC, you need to configure the following settings.

For details on settings and operating your TV, refer to the instruction manual for the TV.

a Check that ARC is enabled on the TV.

b Switch the TV input to display video from the unit.

c Press ON SCREEN.

d Use the cursor keys to select “Setup” and press ENTER.

e Use the cursor keys (e/r) to select “HDMI”.

f Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.

g Use the cursor keys to select “On”.

h Press ON SCREEN.

a Enable HDMI Control on the TV and playback devices (such as HDMI 

Control-compatible BD/DVD player).

b Turn off the TV’s main power and then turn off the unit and playback devices.

c Turn on the unit and playback devices and then turn on the TV’s main power.

d Switch the TV input to display video from the unit.

e Check the following.

On the unit: The input to which the playback device is connected is selected. If not, 
select the input source manually.

On the TV: The video from the playback device is displayed.

f Check that the unit is properly synchronized with the TV by turning off the TV or 

adjusting the TV volume with the TV remote control.

This completes the necessary settings.

If you select a TV program with the TV remote control, the input source of the unit will be 
automatically switched to “AUDIO 1” and the TV audio will be played back on the unit.

If you cannot hear the TV’s audio, check that “ARC” (p.122) in the “Setup” menu is set 
to “On”.

• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again) 

the devices. It may solve the problem.

• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on 

the TV.

• If the audio is interrupted while using ARC, set “ARC” (p.122) in the “Setup” menu to “Off” and use an audio 

cable (digital optical or stereo pin cable) to input TV audio to the unit (p.37).

• “AUDIO 1” is set as TV audio input at the factory. If you have connected any external device to the AUDIO 1 

jacks, use “TV Audio Input” (p.122) in the “Setup” menu to change the TV audio input assignment. To use 
the SCENE function (p.61), you also need to change the input assignment for SCENE(TV).