Yamaha AVENTAGE RX-A3020 User Manual

PREPARATIONS

➤ Optimizing the speaker settings automatically (YPAO)

En

If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.

However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.

A speaker cable may be connected with the reverse polarity 
(+/-).

Select “Wiring” in “Result” (p.56) and check the cable connections (+/-) of the speaker identified by 
“Reverse”. If the speaker is connected incorrectly, turn off the unit and then reconnect the speaker cable. 
Depending on the type of speakers or room environment, this message may appear even if the speakers are 
connected correctly. In this case, you can ignore the message.

A speaker is placed more than 24 m (80 ft) from the listening 
position.

Select “Distance” in “Result” (p.56) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m (80 
ft) of the listening position.

There are significant volume differences between the 
speakers.

Check the usage environment and cable connections (+/-) of each speaker, and the volume of the 
subwoofer. We recommend using the same speakers or speakers with specifications that are as similar as 
possible.