Yamaha AVENTAGE RX-A3020 User Manual

PLAYBACK

➤ Listening to FM/AM radio

En

You can tune into a radio station by specifying its frequency or 
selecting from registered radio stations.

• The radio frequencies differ depending on the country or region where the unit is 

being used. The explanation of this section uses a display with frequencies used 
in U.K. and Europe models.

• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM 

antennas.

(Asia and General models only)

At the factory, the frequency step setting is set to 50 kHz for FM and 
9 kHz for AM. Depending on your country or region, set the 
frequency steps to 100 kHz for FM and 10 kHz for AM.

When holding down STRAIGHT on the front panel, 
press MAIN ZONE z.

Press MAIN ZONE z to set the unit to standby 
mode and turn it on again.

TUN./CH: Increase/decrease the frequency. Hold down the 
key for about a second to search stations automatically.

Numeric keys: Enter a frequency directly. For example, to 
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).

“TUNED” lights up when a signal is received from a radio 
station.

“STEREO” also lights up when a stereo signal is received.

• “Wrong Station!” appears when you enter a frequency that is out of 

reception range.

• (U.S.A. model only)

You can switch between “Auto” (stereo) and “Mono” (monaural) for FM radio 
reception in “Audio Mode” (p.102) in the “Option” menu. When the signal 
reception for an FM radio station is unstable, switching to monaural may 
improve it. (HD Radio programs are not available when the unit is in the 
monaural reception mode.)

• (Except for U.S.A. model)

You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM 
radio reception in “FM Mode” (p.102) in the “Option” menu. When the signal 
reception for an FM radio station is unstable, switching to monaural may 
improve it.

MAIN ZONE z

STRAIGHT

PROGRAM

      F M 5 0 / A M 9

T U N E R  F R Q  S T E P

   F M  8 7 . 5 0 M H z

   F M  9 8 . 5 0 M H z