Yamaha AVENTAGE RX-A2020 User Manual

CONFIGURATIONS

➤ Controlling external devices with the remote control

En

Perform the following steps (a and b) within 
10 seconds.

a On the unit, press one of the following keys to which you want to 

assign a function.

For playback device: SOURCE z, menu operations keys, 
DISPLAY, MODE, external device operation keys, numeric keys

For TV: TV operation keys

b On the external device, press the key from which the operation is 

learned until “OK” appears in the display window.

If “NG” appears, learning has failed. Repeat from Step 4.

• This remote control can learn approximately 200 functions (may be 

decreased depending on the signals). If “FULL” appears in the display 
window, clear unnecessary assignments to free some memory space for the 
new functions.

You can edit the device names or scene names displayed on the 
remote control’s display window.

Perform each of the following steps within 30 seconds.

Otherwise, the setting will be canceled. If this happens, 
repeat from Step 1.

Use the cursor keys (q/w) to select “RENAME” and 
press ENTER.

For playback device: press the input selection key 
(corresponding to the input jacks where the device is connected).

For TV: press TV z.

For AV receiver (the unit): press RECEIVER z.

For scene: press one of the SCENE keys.

Remote control of external device

5 to 10 cm (2 to 4”) apart

• If you press RECEIVER z in Step 3, you can assign functions of an external 

receiver to the menu operation keys, external device operation keys or 
numeric keys. However, it makes these keys to control the unit impossible. If 
you need to restore the remote control code for the unit, perform the following 
steps.

a Press SETUP.
b Use the cursor keys (q/w) to select “CLEAR” and press ENTER.
c Use the cursor keys (q/w) to select “LEARN” and press ENTER.
d Press RECEIVER z.
e Hold down ENTER until “OK” appears on the window display.
f To exit from the setup menu, press SETUP.

RENAME

z  

z 

z