Yamaha AVENTAGE RX-A2020 User Manual

CONFIGURATIONS

➤ Updating the unit’s firmware

En

New firmware that provides additional features or product 
improvements will be released as needed. If the unit is connected 
to the Internet, you can download the firmware via the network and 
update it.

• You can also update the firmware using the USB memory device from the 

“ADVANCED SETUP” menu (p.135).

A firmware update is available if the following message is displayed 
after ON SCREEN is pressed.

The on-screen display turns off.

If “UPDATE SUCCESS PLEASE POWER OFF!” 
appears on the front display, press MAIN ZONE z 
on the front panel.

The firmware update is complete.

• If you want to update the firmware later, select “CLOSE” in Step 2. “!” (exclamation 

mark) appears at the upper right of the “Information” and “System” icons, and a 
message will be displayed in the “System” screen (p.132). You can update the 
unit’s firmware by pressing ENTER in the “System” screen.

• Do not operate the unit or disconnect the power cable or network cable during 

firmware update. Firmware update takes about 20 minutes or more 
(depending on your Internet connection speed).

Information

icon

Message

System Icon