Yamaha 376 User Manual

■

• 2-channel as well as multi-channel PCM, Dolby Digital and 

DTS signals input at the HDMI IN 1, HDMI IN 2 or HDMI IN 
3 jack can be output at the HDMI OUT jack only when 
“Support Audio” is set to “Other” (see page 115).

• Audio signals input at the HDMI IN jacks are not output at the 

analog AUDIO OUT and DIGITAL OUTPUT jacks.

■

• When the analog video signals are input at the COMPONENT 

VIDEO, S VIDEO and VIDEO jacks, the priority order of the 
input signals is as follows: 
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO

• The analog video signals output at the COMPONENT VIDEO 

jacks can be deinterlaced from 480i (NTSC)/576i (PAL) to 
480p/576p. Set “Component I/P” to “On” in “Video” to activate 
this feature (see page 102).

• Digital video signals input at the HDMI IN 1, HDMI IN 2 or HDMI IN 

3 jack cannot be output to analog video output jacks.

• The analog component video signals with 480i (NTSC)/576i 

(PAL) of resolution are converted to the s-video or composite 
video signals and output at the S VIDEO MONITOR OUT and 
VIDEO MONITOR OUT jacks.

• Component interlace/progressive conversion (see page 102) and 

HDMI up-scaling (see page 102) are available only when 
“Conversion” is set to “On” (see page 102).

• Use the “HDMI Up-Scaling” parameter in “Video” to 

deinterlace and convert the resolution of the analog video 
signals output at the HDMI OUT jack (see page 102).

• The GUI screen signal is not output at the VCR 1 OUT and 

DVR/VCR 2 OUT jacks and is not recorded.

Video conversion (see page 102)