Yamaha HTR-5230RDS User Manual
38
1.
PRO LOGIC/Normal
15 to 30
20
DOLBY DIGITAL/Normal
0 to 15
5
PRO LOGIC/ENHANCED
15 to 30
20
DOLBY DIGITAL/ENHANCED
0 to 15
5
2.
70 mm SPECTACLE
15 to 30
23
DGTL SPECTACLE
1 to 99
15
70 mm SCI-FI
15 to 30
20
DGTL SCI-FI
1 to 99
16
3.
70 mm ADVENTURE
15 to 30
20
DGTL ADVENTURE
1 to 99
15
70 mm GENERAL
15 to 30
20
DGTL GENERAL
1 to 99
15
4.
MONO MOVIE
1 to 99
49
5.
TV SPORTS
1 to 99
9
6.
DISCO
1 to 99
40
7.
ROCK CONCERT
1 to 99
16
8.
CONCERT HALL
1 to 99
44
DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor with the Dolby
Pro Logic decoder or Dolby Digital decoder, you can adjust
the delay time between the main sound and sound effect,
and each speaker’s output level as you wish.
Pro Logic decoder or Dolby Digital decoder, you can adjust
the delay time between the main sound and sound effect,
and each speaker’s output level as you wish.
Delay Time
You can adjust the time difference between the beginning of
the sound from the main speakers and the beginning of the
sound effect from the rear speakers. The larger the value,
the later the sound effect is generated. The delay time can be
individually adjusted to all DSP programs.
the sound from the main speakers and the beginning of the
sound effect from the rear speakers. The larger the value,
the later the sound effect is generated. The delay time can be
individually adjusted to all DSP programs.
Notes
• Adding too much delay will cause an unnatural effect with some
sources.
• The sound is momentarily interrupted while adjusting the delay
time.
Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer
Right Rear and Left Rear Speakers,
and Subwoofer
If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
“ADJUSTING THE SPEAKER BALANCE” on pages 17
and 18.
speaker even if it has already been adjusted in
“ADJUSTING THE SPEAKER BALANCE” on pages 17
and 18.
Notes
• The sound output level of the center speaker cannot be adjusted
when the input signal is analog, PCM audio, or encoded with
Dolby Digital in 2-channel.
Dolby Digital in 2-channel.
• If “CENTER SP” in the SET MENU is set to the NONE position,
the sound output level of the center speaker cannot be adjusted.
This is because the center channel sound is automatically output
from the right and left main speakers.
This is because the center channel sound is automatically output
from the right and left main speakers.
• Once the sound output level has been adjusted, the level will be
the same for all DSP programs.
Speaker
Control range (dB)
Preset value
Center
–20 to +10
0
Right rear
–20 to +10
0
Left rear
–20 to +10
0
Subwoofer
–20 to 0
0
Program
Control
range (ms)
range (ms)
Preset
value
value
0108V396RDS34-40_EN
1/18/0, 3:12 PM
38