Yamaha HTR-6140 User Manual

Press A

STANDBY/ON on the front panel to 

set this unit to the standby mode.
Refer to the right column for details.

Press and hold K

TONE CONTROL and 

then press A

STANDBY/ON to turn on this 

unit.
This unit turns on, and the advanced setup menu 
appears in the front panel display.

Press L

PROGRAM l / h to select “SP 

IMP.”.
“SP IMP.” and the current speaker impedance setting 
(“8

Ω MIN”) appear in the front panel display.

Press M

STRAIGHT repeatedly to select 

Ω MIN”.

Press A

STANDBY/ON to save the new 

The setting you made is reflected next time you turn on this unit.

■ Turning on this unit

Press A

STANDBY/ON (or HPOWER) to turn 

y

When you turn on this unit, there will be a 4 to 5-second delay 
before this unit can reproduce sound.

■ Set this unit to the standby mode

Press A

STANDBY/ON (or ISTANDBY) to set 

this unit to the standby mode.
In the standby mode, this unit consumes a small amount of 
power in order to receive infrared signals from the remote 
control.

Caution
If you are to use 6 ohm speakers, set “SP IMP.” to 
“6

Ω MIN” as follows BEFORE using this unit.

01EN_HTR-6140_U.book  Page 21  Friday, February 1, 2008  2:26 PM