Yamaha htr-5890 User Manual

■

Press l / h to display the detailed information about individual errors. Select “RETRY” to try auto setup procedure 
again.

Connect MIC!

Optimizer microphone is not connected.

• Connect the supplied optimizer microphone to the 

OPTIMIZER MIC jack on the front panel.

Unplug HP!

Headphones are connected.

• Unplug the headphones.

E-1:NO FRONT SP

Front L/R channel signal(s) is (are) not 
detected.

• Select the front speakers with SPEAKER A or B.
• Check the front L/R speaker connections.

E-2:NO SURR.SP

A surround channel signal is not detected.

• Check the surround speaker connections.

E-3:NO PRES. SP

A presence channel signal is not detected.

• Check the presence speaker connections.

E-4:SBR->SBL

Only right surround back channel signal is 
detected.

• Connect the surround back speaker to the LEFT 

SURROUND BACK SPEAKERS terminal if you 
only have one surround back speaker.

E-5:NOISY

Background noise is too loud.

• Try auto setup procedure in a quiet environment.
• Turn off noisy electric equipment like air conditioners 

(etc.) or move them away from the optimizer 
microphone.

E-6:CHECK SURR.

Surround back speaker(s) is (are) connected, 
though surround L/R speakers are not.

• Connect surround speakers when you use (a) 

surround back speaker(s).

E-7:NO MIC

The optimizer microphone was unplugged 
during the auto setup procedure.

• Connect the supplied optimizer microphone to 

OPTIMIZER MIC jack on the front panel.

E-8:NO SIGNAL

The optimizer microphone does not detect test 
tones.

• Check the microphone setting.
• Check the speaker connections and placement.

E-9:USER CANCEL

The auto setup procedure was cancelled due to 
user activity.

• Perform the auto setup procedure again. 

E-10:OTHER ERROR

An internal error occurred.

• Perform the auto setup procedure again.

01EN00_HTR5890U.book  Page 29  Thursday, December 23, 2004  12:39 PM