Yamaha htr-5890 User Manual
CONTROLS AND FUNCTIONS
5
Eng
lish
IN
TR
ODUC
ODUC
TI
ON
C
PHONES (SILENT CINEMA) jack
Outputs audio signals for listening with headphones.
When you connect headphones, no signals are output to
the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
When you connect headphones, no signals are output to
the PRE OUT jacks or to the speakers.
All Dolby Digital and DTS audio signals are mixed down
to the left and right headphone channels.
D
SPEAKERS A/B
Turn on or off the set of front speakers connected to the A
and/or B terminals on the rear panel each time the
corresponding button is pressed.
and/or B terminals on the rear panel each time the
corresponding button is pressed.
E
STRAIGHT/EFFECT
Switches the sound fields off or on. When STRAIGHT is
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
selected, input signals (2-channel or multi-channel) are
output directly from their respective speakers without
effect processing.
F
PROGRAM
Use to select sound field programs or adjust bass/treble
balance (in conjunction with TONE CONTROL).
balance (in conjunction with TONE CONTROL).
G
TONE CONTROL
Use to adjust the bass/treble balance for the front left/right
and center channels (see page 35).
and center channels (see page 35).
H
INPUT MODE
Sets the priority (AUTO, DTS, ANALOG) for the type of
signals received when one component is connected to two
or more of this unit’s input jacks (see page 40).
signals received when one component is connected to two
or more of this unit’s input jacks (see page 40).
I
INPUT selector
Selects the input source you want to listen to or watch.
J
MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with INPUT (or the input
selector buttons on the remote control).
K
VIDEO AUX jacks
Input audio and video signals from an external source
such as a game console. To reproduce source signals from
these jacks, select V-AUX as the input source.
such as a game console. To reproduce source signals from
these jacks, select V-AUX as the input source.
01EN00_HTR5890U.book Page 5 Thursday, December 23, 2004 12:39 PM