Yamaha HTR-5240RDS User Manual

Be sure to connect the right channel (R), left channel (L),
“+” (red) and “–” (black) properly. If the connections are
faulty, no sound will be heard from the speakers, and if the
polarity of the speaker connections is incorrect, the sound
will be unnatural and lack bass.

• Use speakers with the specified impedance shown on

the rear panel of this unit.

• Do not let the bare speaker wires touch each other and

do not let them touch any metal part of this unit. This
could damage the unit and/or speakers.

■

One or two speaker systems can be connected to these
terminals. If you use only one speaker system, connect it to
either of the SPEAKERS A or B terminals.

■

A rear speaker system can be connected to these terminals.

■

A center speaker can be connected to this terminal.

MAINS

R

L

A

B

100W MAX. TOTAL

SWITCHED

 MAIN A OR B : 4

Ω

MIN. /SPEAKER

               A + B : 8

Ω

MIN. /SPEAKER

 CENTER

: 6

Ω

MIN. /SPEAKER

 REAR

: 6

Ω

MIN. /SPEAKER

 MAIN A OR B : 8

Ω

MIN. /SPEAKER

              A + B : I6

Ω

MIN. /SPEAKER

 CENTER

: 8

Ω

MIN. /SPEAKER

 REAR

: 8

Ω

MIN. /SPEAKER

SET BEFORE POWER ON

REAR

(SURROUND)

CENTER

MAIN

–

–

+

+

+

–

+

–

R

L

If you have a subwoofer with built-
in amplifier, including the
YAMAHA Active Servo Processing
Subwoofer System, connect the
input terminal of the subwoofer
system to the SUBWOOFER
OUTPUT terminal of this unit.

0103V496RDS08-19_EN

1/6/0, 10:20 AM

15