Yamaha HTR-5930 User Manual

■ Dynamic range

 4 D.RANGE

Use this feature to select the amount of dynamic range 
compression to be applied to your speakers or 
headphones. This setting is effective only when the unit is 
decoding Dolby Digital and DTS signals.
Choices: MIN (minimum), STD (standard), MAX 

(maximum)

SP D.R

Adjusts the speaker compression.

HP D.R

Adjusts the headphone compression.

• Select “MIN” if you regularly listen at low volume 

levels.

• Select “STD” for general use.
• Select “MAX” to preserve the greatest amount of 

dynamic range.

■ Tone bypass 

5 TC.BYPASS

Use this feature to select whether audio output bypasses 
tone control circuitry when “BASS” and “TREBLE” are 
set to 0 dB (see page 24).
Choices: AUTO, OFF
• Select “AUTO” if you want signals to bypass tone 

control circuitry to provide the purest signal possible.

• Select “OFF” if you do not want signals to bypass tone 

control circuitry.

Use this menu to reassign input jacks or select the input 
mode.

■ Input assignment 

1 INPUT ASSIGN

Use this feature to assign the input jacks according to the 
component to be used if the initial settings of this unit do 
not correspond to your needs. Change the following 
parameters to reassign the respective jacks and effectively 
connect more components.
Once the input jacks are reassigned, you can select the 
corresponding component by using INPUT l / h on the 
front panel (or the input selector buttons on the remote 
control).

[A][B][C]

Choices: [A] DVD, DTV/CBL, VCR, V-AUX

[B] DVD, DTV/CBL, VCR, V-AUX
[C] DVD, DTV/CBL, VCR, V-AUX

1 2

Choices: (1) DVD, DTV/CBL, CD, VCR, MD/CD-R, 

V-AUX

(2) DVD, DTV/CBL, CD, VCR, MD/CD-R, 

V-AUX

3

Choices: (3) DVD, DTV/CBL, CD, VCR, MD/CD-R, 

V-AUX

• You cannot select a specific item more than once for the same 

type of jack.

• When you connect a component to both the COAXIAL and 

OPTICAL jacks, priority is given to the signals input at the 
COAXIAL jack.

■ Input mode 

2 INPUT MODE

Use this feature to designate the input mode for sources 
connected to the DIGITAL INPUT jacks when you turn on 
this unit (see page 26).
Choices: AUTO, LAST
• Select “AUTO” to allow this unit to automatically 

detect the type of input signal and select the 
appropriate input mode.

• Select “LAST” to set this unit to automatically select 

the last input mode used for that source.