Yamaha HTR-6080 User Guide

■ SCENE IR code setting   SCENE IR
Use this feature to output the remote control signals at the 
REMOTE OUT jack automatically when this unit is in the 
SCENE mode.
Choices: ON, OFF
• Select “ON” when the component connected to the 

REMOTE OUT jack is the Yamaha component and has 
the capability of the SCENE control signals. This unit 
automatically sends the remote control signals to the 
component.

• Select “OFF” when the component connected to the 

REMOTE OUT jack is not the Yamaha component and 
does not have the capability of the SCENE control 
signals.

If noises are output when you operate the SCENE function, set 
“SCENE IR” to “OFF”.

■ Bi-amplifier setting   BI-AMP
Use this feature to activate or deactivate the bi-amplifier 
function (see page 14).
Choices: ON, OFF
• Select “ON” if you want to activate the bi-amplifier 

function. “SUR.B L/R SP” is set to “NONE” 
automatically, and this unit outputs the front channel 
audio signals at the SURROUND BACK/BI-AMP 
speaker terminals.

• Select “OFF” if you want to deactivate the bi-amplifier 

function.

When “BI-AMP” is set to “ON”, you can only select “FRONT B” 
or “NONE” in “EXTRA SP ASSIGN” (see page 72).

■ Video parameter reset   V.RESET
Use this feature to initialize the “VIDEO CONV.”, 
“HDMI UP-SCALING”, “HDMI ASP” and “OSD 
SHIFT” settings in “DISPLAY SET” (see page 81).
Choices: YES, CANCEL

■ Monitor check   MON.CHK
Use this feature to activate or deactivate the monitor check 
function of this unit. When this parameter is set to “YES”, 
this unit receives the information of the available video 
signal resolutions from the video monitor connected via 
HDMI (see page 81).
Choices: YES, SKIP

See page 90 for the operation of the advanced setup.