Yamaha HTR-5940 User Manual

y

“NIGHT:CINEMA” and “NIGHT:MUSIC” adjustments are 
stored independently.

• You cannot use the night listening modes when the 

“DIRECT STEREO” program (see page 38) is selected or 
when the component connected to the MULTI CH INPUT 
jacks is selected as the input source (see page 37) even 
though the NIGHT indicator lights up when “DIRECT 
STEREO” is selected.

• The night listening modes may vary in effectiveness 

depending on the input source and surround sound settings 
you use.

This unit comes with a variety of input jacks. Do the 
following to select the type of input signals you want to 
use.

y

You can adjust the default input mode of this unit by using the 
“INPUT MODE” parameter in “INPUT MENU” (see page 82).

• To play DTS-encoded DVDs and CDs, (when using a digital 

audio connection, be sure to set “INPUT MODE” to “DTS”.

• If the digital output data of the player has been processed in any 

way, you may not be able to perform DTS decoding depending 
on the player even if you make a digital connection between this 
unit and the player.

AUTO

Automatically selects input signals in 
the following order:
1) Digital signals
2) Analog signals

DTS

Selects only digital signals encoded in 
DTS. If no DTS signals are input, no 
sound is output.

ANALOG

Selects only analog signals. If no 
analog signals are input, no sound is 
output.

• When “INPUT MODE” is set to “AUTO”, this unit 

automatically switches to the appropriate decoder if a 
Dolby Digital or DTS signal is detected.

• We recommend setting “INPUT MODE” to “AUTO” in 

most cases.

pDVD

DVD

AUTO