Yamaha HTR-5940 User Manual

■ Speaker impedance  SP IMP.
Use this feature to set the speaker impedance of this unit 
so that it matches that of your speakers.
Choices: 8

ΩMIN, 6ΩMIN

• Select “8

ΩMIN” to set the speaker impedance to 8 Ω.

• Select “6

ΩMIN” to set the speaker impedance to 6 Ω.

*

The Canada model cannot use two separate speaker systems 
(A and B) simultaneously when “SP IMP.” is set to “8

ΩMIN”. 

■ Factory presets  PRESET
Use this feature to reset all the parameters of this unit to 
the initial factory settings (see page 91).
Choices: CANCEL, RESET
• Select “CANCEL” not to reset any parameters of this 

unit.

• Select “RESET” to reset the parameters of this unit.

• This setting completely resets all the parameters of this unit 

including the “SET MENU” parameters. However, the 
advanced setup menu parameters will not be initialized.

• The initial factory settings are activated next time you turn on 

this unit.

■ Remote control AMP ID  REMOTE AMP
Use this feature to set the AMP ID of this unit for remote 
control recognition (see page 89).
Choices: ID1, ID2
• Select “ID1” when the remote control AMP ID library 

code is set to “00001”.

• Select “ID2” when the remote control AMP ID library 

code is set to “00002”.

You need to set the corresponding remote control AMP library 
code for the remote control (see page 89).

■ Remote control TUNER ID  REMOTE TUN
Use this feature to set the TUNER ID of this unit for 
remote control recognition (see page 89).
Choices: ID1, ID2
• Select “ID1” when the remote control TUNER ID 

library code is set to “81916”.

• Select “ID2” when the remote control TUNER ID 

library code is set to “81917”.

You need to set the corresponding remote control TUNER library 
code for the remote control (see page 89).

■ Remote control XM ID  REMOTE XM

Use this feature to set the XM ID of this unit for remote 
control recognition (see page 90).
Choices: ID1, ID2
• Select “ID1” when the remote control XM ID library 

code is set to “81918”.

• Select “ID2” when the remote control XM ID library 

code is set to “81919”.

You need to set the corresponding remote control XM library 
code for the remote control (see page 89).

■ Tuner frequency step  TU

Use this feature to set the tuner frequency step according 
to the frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select “AM10/FM100” for North, Central and South 

America.

• Select “AM9/FM50” for all other areas.

8

ΩMIN

Front

If you use one set (A or B), 
the impedance of each 
speaker must be 8

Ω or 

higher.

If you use two sets (A and 
B), the impedance of each 
speaker must be 16

Ω or 

higher.

*

Center

The impedance of each 
speaker must be 8

Ω or 

higher.

Surround

Surround back

6

ΩMIN

Front

If you use one set (A or B), 
the impedance of each 
speaker must be 6

Ω or 

higher.

If you use two sets (A and 
B), the impedance of each 
speaker must be 12

Ω or 

higher.

Center

The impedance of each 
speaker must be 6

Ω or 

higher.

Surround

Surround back