Yamaha HTR-5440RDS User Manual
40
DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor with the
Dolby Pro Logic decoder, Dolby Digital decoder or DTS
decoder, you can adjust the delay time between the main
sound and sound effect, and each speaker’s output level as
you wish.
Dolby Pro Logic decoder, Dolby Digital decoder or DTS
decoder, you can adjust the delay time between the main
sound and sound effect, and each speaker’s output level as
you wish.
Delay Time
You can adjust the time difference between the beginning
of the sound from the main speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
of the sound from the main speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
Notes
• Adding too much delay will cause an unnatural effect with some
sources.
• The sound is momentarily interrupted while adjusting the delay
time.
Program
Preset value (ms)
1.
CONCERT HALL
45
2.
JAZZ CLUB
30
3.
ROCK CONCERT
15
4.
DISCO
26
5CH STEREO
2
GAME
36
5.
TV SPORTS
10
6.
MONO MOVIE
69
7.
70 mm SPECTACLE
23
DGTL SPECTACLE
13
DTS SPECTACLE
13
70 mm SCI-FI
20
DGTL SCI-FI
16
DTS SCI-FI
16
8.
70 mm ADVENTURE
20
DGTL ADVENTURE
15
DTS ADVENTURE
15
70 mm GENERAL
20
DGTL GENERAL
15
DTS GENERAL
15
9.
PRO LOGIC/NORMAL
20
DOLBY DIGITAL/NORMAL
5
DTS DIGITAL SUR./NORMAL
5
PRO LOGIC/ENHANCED
20
DOLBY DIGITAL/ENHANCED
5
DTS DIGITAL SUR./ENHANCED
5
Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer
Right Rear and Left Rear Speakers,
and Subwoofer
If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
“ADJUSTING THE SPEAKER BALANCE” procedure.
speaker even if it has already been adjusted in
“ADJUSTING THE SPEAKER BALANCE” procedure.
Notes
• If “CENTER SP” in the SET MENU is set to the NON position,
the sound output level of the center speaker cannot be adjusted.
This is because the center channel sound is automatically output
from the right and left main speakers.
This is because the center channel sound is automatically output
from the right and left main speakers.
• Once the sound output level has been adjusted, the level will be
the same for all DSP programs.
Speaker
Preset value (dB)
Center
0
Right rear
0
Left rear
0
Subwoofer
0
0107V420RDS35-42_EN
2/12/1, 1:36 PM
40