Kenwood KRF-V7773D User Manual
66
Mo
ving Around
T
roubleshooting
Receiver/Tuner
I can’t receive a radio station
Check that:
Check that:
•
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
nections and Setup Guide.
•
The broadcast band is correct. See “Radio Tuning” on page␣ 35 of this
manual.
manual.
•
The tuner is set to the correct frequency. See “Radio Tuning” on page␣ 35
of this manual.
of this manual.
I can’t access any RDS (Radio Data System) functions
•
•
Confirm that the radio station is broadcasting RDS.
•
Make sure you use the Auto Memory function to store RDS stations in
memory. See “Storing RDS Stations Automatically” on page 37 of this
manual.
memory. See “Storing RDS Stations Automatically” on page 37 of this
manual.
I’m getting a lot of static/interference
•
•
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
electrical appliance.
•
Adjust the antenna for best reception.
•
If you live in an area with weak FM signals, consider a rooftop or an
amplified FM antenna (available at any home electronics store).
amplified FM antenna (available at any home electronics store).
When I press a key to tune to a preset station, the receiver does not
respond
Check whether:
respond
Check whether:
•
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page␣ 64 of this manual.
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page␣ 64 of this manual.
•
The Tuner input is selected. See “Radio Tuning” on page␣ 35 of this
manual.
manual.
67
T
roubleshooting
Receiver/Tuner